The maximum feed frame raising amount is 30 MM and maximum presser foot raising amount is 20MM; so, any type of heavy weighted fabric can be easily fed.
■ SPS/A(B)-1811/2211G (H) P-21
The amount of feed frame lowering is divided into two steps to result in the convenient fine location setting.
The mid frame holding position is simply adjusted by turning a dialing nut.
■ SPS/A(B)-1811/2211G (H) P-22
Since the feed frame is detached and separated from side to side, the right and left frames are differently controlled in terms of the raising amount and speed; it shows excellent sewing result for the sewing project with unbalanced right and left frames.
Division
SPS/A(B)-1811/2211H
SPS/A(B)-1811/2211G
Usage
heavy
Ordinary
Sewing domain(X,Y)
220 mm x 110 mm
Sewing range
Maximum 2,000 spm ( Stitch width 3mm )
Stitch width
0,1 ~ 12.7 mm
Needle used
DP x 17 # 18
DP x 5 # 14
Hook
Double shuttle hook
Pressing lever increase
Maximum 30 mm ( Air : Maximum 30 mm )
Presser foot increase
Maximum 20 mm
Presser foot strok
4 mm ( 0 ~ 7 mm )
Thread Trimmer
Basic Offer
Wiper
Basic Offer ( Electronically Wiper )
Emergency Stop
Basic Offer
Memory
3.5" FDD (2HD)
No. of inputable pattern
Maximum 691 Pattern
No. of inputable needle
Maximum 360,000 neelde
reduced/enlarged ratio
1 ~ 400% ( 0.1% STEP )
Main-pivot driving motor
SPS/B Series : 500W Direct AC Servo motor
SPS/B Series : 500W AC Servo motor
Feed system
Feed by stepping pulse motor
Electricity
Single phase 110V ~ 240V, Three phase 200V ~ 440V, 50/60Hz
