 |
 |
While pressing the button A, B and C in the C area at the same time, power the machine on. |
|
|
 |
 |
“tESt” is displayed in the A area for a short time. |
|
|
 |
 |
“t-01” is displayed in the A area. |
|
| |
|
|
|
|
 |
 |
Press the Ready button in the B area. |
|
|
 |
 |
Make sure “t-03” is displayed in the A area. |
|
|
 |
 |
Set the Test Number by pressing the +(Forward) button in the B area. |
|
| |
|
|
|
|
 |
 |
“100” is displayed in the A area. |
|
|
|
 |
Pressing the Ready button in the B area operates the Main Motor. |
|
 |
Pressing the Ready button in the B area stops the Main Motor. |
|
|
 |
 |
Pressing the +(Forward) button in the B area increases the speed of the Main Motor. |
 |
 |
Pressing the +(Forward) button in the B area decreases the speed of the Main Motor. |
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
※ If the test is not conducted in a normal way, the reason can be a problem in the Main Board, Digital Board or Main Motor. Refer to an A/S engineer for check.
※ Power the machine off and on again in order to end the machine test and start sewing.
|
