HOME > Resource > VideoResource > Lockstitch > Electronicaly Controled > SPS-1202Series
* Adobe Acrobat Reader is required for viewing the PDF documents.
* Clicking the bottom part of the menu can download the Adobe Acrobat Reader file.
Replace the needle bar Load of the Y-feed shaft

Set the X, Y origin

Set the roller of the thread trimming Set the thread trimming driving link stopper
Adjust the highest stop position of theneedle bar Adjust the location of the thread trimming shaft
Set the thread trimming cam Replace and set the mes

Replacement of the Button Clamp(AssÕy) Adjusting the Height of the Button Clamp
The Button Clamp Adjusting Plate Setting Replacement of the Button Clamp Holder and Base
Adjust the hook timing Adjust the upper side spring of the shuttle
Set the thread release Set the wiper
Adjust the tension of the upper thread

Adjust the tension of the belt Adjust the clearance of the lower shaft collar
Adjust the clearance of the shaking shaft gear

Supply oil

Replace the X sensor Replace the Y sensor
Adjust the clearance of the X.Y motor gears

Set the solenoid of the presser plate Set the thread trimming solenoid

Replace the solenoid of the presser plate Error No. 5
Error No. 55

Disassemble and assemble the direct drivemotor

LIST OF THE GAUGES Button Clamp